Royal Exclusiv Bubble King Double Cone 250 internal + RD3 50W beste afschuimer geschikt tot 1500liter aquarium
Bubble King®Double Cone 250:
Regelbare Red Dragon® 3 Mini Speedy skimmer pump 50 Watt 1.500 l/h met 10V regelaansluiting
Motor toerental is regelbaar: 300-3000 1/min
Grondplaat: 30 cm x 37 cm / height ~ 59 cm
Technical data Bubble King® Double Cone 250:
Skimmer pump regelbare Speedy RD3 met 10V regelaansluiting
Capaciteit instelbaar: max.1.500 l/h lucht inlaat en max. ~ 3.000 l/h Water inlaat
wattage – active power: P = min. 15Watt/h – max. 50 Watt/h
operating voltage: 230 Volt 50 Hz
Protection class: IP 68
Gewenst water nivo: ~ 130 mm tot ~ 250 mm
Gewicht skimmer: 9 kg inclusief pomp
Afmetingen zonder pomp:
300 mm wide / 370 mm lengte / ~ 590 mm hoogte
Afmetingen met pomp:
380 mm wide / 440 mm lengte / ~ 590 mm hoogte
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
The connection of a controller/computer is prepared in each pump!
Prepared for connection to an aquarium computer (E.g. GHL) via a 0-10V interface.
The additional controller, for the connection to the computer, costs 159€ (incl. all connection cables and main adaptor)
Tested so far folowing these computers:
GHL ProfiLux 3.1 and from Neptune Systems the Apex Aqua Controller.
Compatible with following brands:
//////////////////////////////////////////////////////////////////////////////
Functioning of the electronics:
Once a voltage > 0,5V to the 10V interface is, the interface adapter takes over controlling and the system and lock(disable) the buttons on the controller. Voltage will be < 0,5V normal controller operation and the buttons are again released. So can the interface adapter stay connected without performing a function.
If the Aquarium(tank)-computer voltage under 0,5V the 0-10V interface is shut down and the pump can be operated manually. From 0,5V, the interface will take over control of the scheme. In the area of 0,5V-0,8V the pump is switched off. 1V starts the pump at the lowest level (15W) and run. At an increase of 0,5V will increase the level, also. So 1V = 15W 2,5V = 25W….. 5,0V = 50W.
At a higher input voltage remains the Speedycontroller to the maximum setting are available and no longer increases. The interface adapter behaves as if the corresponding would push the button.
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////